Deutsch English

Categories

Newsletter subscription

e-mail address:

Control Gear HORTI Compact 600W

Control Gear HORTI Compact 600W
Zoom image

Technical data:
voltage: 230 V
frequency: 50 Hz
Maximum current consumption: 3.7 A
PF: =0,98
THD: = 10
Suitable for NDL / HPS : Yes
Suitable for MH : Yes
Length distance HPS: up to 20 metres
Length distance MH: up to 2 metres
Thermally fused: Yes

Compatible ONLY with 600W sodium or metal halide lamps.

Dimensions of HORTI Gear Compact 600W ballast:
approx. 282 x 100 x 90 mm

64,90 EUR

16 % VAT incl. excl. Shipping costs

Bestand knapp

Product no.: 22241

To start sodium vapour lamps at all, a very high starting current is required. This can only be achieved with a ballast.
HORTI ballasts are thermally fused, i.e. they switch off if they overheat.

In principle, electrical installations may only be installed by trained electricians. The accident prevention and VDE regulations also apply without restriction to research and experimental setups. Therefore, please discuss any problems that may arise with your qualified electrician.

ATTENTION:
The unit is supplied without cable. For connection to the power supply, a 3-core cable with a diameter of 1.5mm is required (3x1.5).

Maximum cable length for metal halide lamps:
3-core cable = 1 m
2-wire cable = 2 m

Maximum cable length for sodium vapour lamps:
3-wire cable = 10 m
2-wire cable = 20 m

Control Gear HORTI Compact 600W Control Gear HORTI Compact 600W Control Gear HORTI Compact 600W

This Product was added to our catalogue on Tuesday 20 October, 2020.