Deutsch English

Heisenberg Oil Extractor, div lengths

Heisenberg Oil Extractor, div lengths
Zoom image

The Heisenberg Öl Extractor for using with gas:

Length of tube: ca. 33cm, ca. 29cm, ca. 19cm
Diameter: ca. 5cm
Material: glass

Easy to use.

Please only use outdoors!

from 34,02 EUR

16 % VAT incl. excl. Shipping costs

Product no.: 54859
Height: 
33cm ( + 1,95 EUR )
29cm ( + 0,97 EUR )
19cm

Using the Heisenberg oil extractor

Attention: Due to the risk of explosion of the gas, all steps must be carried out outdoors!

Do not use near fire or sparks. Do not smoke! A well ventilated room with open windows is not enough!

It is best to wear close-fitting clothing, goggles and gloves.

What do I need:

  • - the oil extractor with glass frit
  • - tight clothing
  • - safety goggles
  • - gloves
  • - 1 small tub (no plastic)
  • - 1 large tub (no plastic)

Unscrew the cap with glass frit from the extractor.

Fill the extractor completely so that no airholes are formed.

Screw the cap from the extractor with the glass frit back on top.

Fill a pot or a tub with hot water, not more than max. 60°C.

Provide a smaller tub (not plastic) that fits into the larger tub to collect the product of exraction.

Keep away from sources of fire and sparks and hold the extrator with the big opening above the small tub with the glass frit, while the gas bottle is placed on the small opening on the top. The glass frit serves as a filter and cover. Gloves should be worn because the extractor can become extremely cold due to the gas.

Spray first for about 30 sec., then wait for about 15 sec. and then continue spraying the gas bottle until it is empty.

Important: The gas must not be inhaled!

Then wait until all the oil is gathered in the small tub. The oil should be bright and transparent.

Now the small collecting tank can be placed with the oil for about 30-45 min in a water bath in the large tub with the hot water. As soon as the butane has completely disappeared, the oil stops bubbling.

Cooled down to about 21°C, the oil can now be safely carried into the house for use.

Recommended products:

Dabbing Silicone Container square 200ml

Dabbing Silicone Container square 200ml

The Silicone Container square is used as a bin for keeping wax and dabbing products (BHO).

Side length:: ca. 17.5cm
Height: ca. 2.5cm
Filling: ca. 200ml

The square Silicone Container is made of silicone, because silicone rejects other materials easily, so no sticking of the wax and oil will occure.

25,25 EUR (16 % VAT incl. excl. Shipping costs)
Dabbing Silicone Container 6+1

Dabbing Silicone Container 6+1

Dabbing Silikon Container to keep and contain sticky material, such as oil and wax  (BHO).

Made of food-proof certificated silicone.

Length x Width x Height: ca. 10 x 5 x 2.5 cm
Chambers
: 6 x 4ml + 1 x 10 ml

9,65 EUR (16 % VAT incl. excl. Shipping costs)

This product is compatible with:

Oil slide Elbow

Oil slide Elbow

Details of the Oil slide Elbow:

Material: Titanium
Cup hight: ca. 2.5cm
Cup diameter: ca. 1.4cm

Useable for 18.8er and 14.5 cut!

You plug the oil slide on a declined, male cut section. By it's own ancled shape, the oil pan itself is unbend.
 

24,27 EUR (16 % VAT incl. excl. Shipping costs)

Heisenberg Oil Extractor, div lengths Heisenberg Oil Extractor, div lengths

This Product was added to our catalogue on Tuesday 24 October, 2017.